Only With Continuous Pyrolysis, Charcoal Briquette Industry Will Get a Supply Of High Quality Raw Materials

Charcoal briquette plant with a large capacity can only be supplied charcoal produced from continuous pyrolysis technology. The quality of products are standard and stable as well as the quantity of large quantities can only be met when using continuous pyrolysis technology in the process of charcoal production. Charcoal of satisfactory market quality can be made in kilns of any size or type when suitable coaling temperature and time conditions are present. It is perhaps more difficult to produce charcoal of consistently high quality in uninsulated metal kilns because of rapid and large heat loss.

The growing popularity of charcoal briquette has spurred great interest recently because its benefit on specific fuel application. Some information on plant equipment, manufacturing detail and the practicability of briquette production with contionous pyrolysis system to provide a few items of special interest.

Equipment : The equipment required for briquette manufacture is highly specialized. Powered units are required for grinding and mixing dry and wet charcoal, wet forming the briquettes, moving material in the process, and continous drying. Production rates are 1 to 3.5 tons of briquettes per hour. The equipment for both capacities is basically the same, but somewhat larger and heavier machines are needed for 3.5 ton output. Standard equipment for a 1-ton-per-hour briquetting plant includes the following :

-Briquette press with paddle feeder

-Hammer mill

-Charcoal feeder with surge hopper

-Paddle mixer

-Vertical fluxer

-Starch feeder or pump

-Briquette drier

-Boiler, 30 horsepower - - 15 pounds per square inch gage pressure

-Conveyors

-Bagging machine

-Building, 60 feet by 120 feet, with 20 feet clear height.

The labor requirements per shift are eight men, including a foreman, a machine operator, a night-shift maintenance man, a bagger and three men for warehouse and miscellaneous jobs.

Plant processing :-In general , charcoal lump and fines as received or from plant storage are fed by screw conveyor to hammer mill or crusher for feed material of 1/8-inch and smaller screen size. The ground charcoal is moved mechanically or by air to a surge bin for metered flows to the mixer, metered amounts of about 5 percent of binder (potato, corn or cassava starch) with water are added. After agiataion in a paddle mixer, the mixture is run through the fluxer for more throrough working of the mass before it is transferred to the press feeder for regulated flow to the forming press.

From the press, the wet or green briquettes are moved by belt conveyor to a special device for uniform loading and continous passage through the drier. The conditions for the drying are usually a 3-to 4-hour period at a temperature of about 275 F. The processing steps are carried out as shown in figure below.

Because of the large daily charcoal requirements and the investment necessary for even the smallest commercial briquette operation, it is not practical for the smaller kiln operator to undertake such manufacture. Operating the smallest commercial plant at a production rate of about 10 tons of briquette per day would require at least 250 tons of charcoal monthly.  Briquetting plants usually operate on two or three shifts per day for most economical production.

 

Only charcoal plant with level of production above 10 tons/day adequate for charcoal briquette plants need.  JFE project can provide charcoal plant (continous pyrolysis technology)  to meet that needs include high specification (quality) of charcoal requirement if it’s needed.      

We Will Produce Charcoal As You Wish

Charcoal has widespread uses include metallurgy, tobbaco curing, water purification (activated carbon), poultry and animal feeds, soil Amendment, and other miscellaneous uses. Charcoal is made by a certain process conditions to achieve the specifications according to their usefulness.

The amounts of moisture (2 to 4 percent), volatiles (18 to 23 percent), ash (1 to 4 percent), and fixed carbon (74 to 81 percent) in charcoal provide an average index of quality for general market acceptance either in lump or briquette form. Charcoal with relatively low volatile content and correspondingly higher amounts of fixed carbon is desirable for specialized industrial uses. Temperatures somewhat higher than the normal kiln operating temperatures of 850° to 950° F (454°  to 510° C) are required to produce it. The volatiles, when present in proportions greater than about 24 percent, will cause smoking when charcoal is burned and will give product degrade in some areas of recreational use.

 

In a continuous process raw organic material of any kind is passed through the retorts and cooked into marketable products. While some of the biogas is used to fuel its own process, on site gas turbines or steam boilers can be fueled by the same gas. Variable speed drives give the operator total control on product quality by altering the residence time of the feed stock. The operator can also vary the percentage split between the bio-oil and charcoal by changing the temperature.

 

Chemical properties can be precisely determined only with analytical equipment. A rough quality test for volatiles can be made, however, by burning samples of charcoal and observing the absence or extent of smoking. A metallic ring when a piece of charcoal is dropped onto a hard surface provides a further rough test for good quality. Too rapid coaling at high temperature usually results in the formation of crumbly charcoal easily broken into small pieces and fines. The species of wood does not influence the chemical quality of charcoal; the physical properties, however, are influenced by wood density and structure. For example, the low-density woods produce charcoal in greater bulk, while some woods will produce brittle charcoal. In general, the lump charcoal obtained from the medium-dense to dense hardwoods is considered a cleaner product because of less breakage and dusting with handling.

The concept of Zero Waste MSW Processing Using Continous Pyrolysis Technology and Biogas System

How did your perspective when looking at the mounting garbage, whether it be problems or challenges that invite the opportunity?

It's no secret that the waste problem has become a common problem in many places, especially in big cities. The challenge is how to make waste processing unit that zero waste and be profitable? Integration of continuous pyrolysis technology and biogas system is the answer on this. With pyrolysis, organic waste, plastics, and tires will produce specific products with high economic value. When the processing of organic waste are the main products produced charcoal, biooil, and syngas. All of them can be used for energy applications. While the plastic is processed then the primary product is syn crude oil whose quality as petroleum. Processing of scrap tires with pyrolysis will produce syn crude oil like in plastic pyrolysis processing, carbon black, syngas and steel wire.

With the sale of the products of pyrolysis, so the activity of MSW processing is not only dependent on the tipping fee, but the majority of the profits derived from the sale of the pyrolysis products. In addition there are two thermal process beside pyrolysis which is used on MSW processing, there are gasification and incineration, but pyrolysis has many advantages over both methods, more details please click here.

In the processing of organic waste with this continuous pyrolysis technology, before the organic waste enter  into the pyrolysis unit, the moisture content of the organic waste need to be reduced to about 10% by using a mechanical device. In this process will produce leachate that rich with organic matter so that the potential for biogas system in anaerobic digestion reactor, so that gas can be produced for power generation. While the byproducts of residual water will be cleaner because the organic components decompose during the formation of biogas, thus safely discharged to the environment and the solid residue will be used as high-quality compost.

Temperature Effect in Pyrolysis Process Of Charcoal Quality

Pyrolysis produces biochar, liquids and gases from biomass by heating the biomass in a low/no oxygen environment. The absence of oxygen prevents combustion. The relative yield of products from pyrolysis varies with temperature. Temperatures of 400–500 °C (752–932 °F) produce more char, while temperatures above 700 °C (1,292 °F) favor the yield of liquid and gas fuel components. Pyrolysis occurs more quickly at the higher temperatures, typically requiring seconds instead of hours. Pyrolysis also may be the most cost-effective way of producing electrical energy from biomaterial. Syngas can be burned directly, used as a fuel for gas engines and gas turbines, converted to clean diesel fuel through the Fischer–Tropsch process or potentially used in the production of methanol and hydrogen. Varying process conditions result in differences in product charcoal, gas or oil produced. Pyrolysis has advantages in producing gas or oil products from waste that can be used as fuel for the pyrolysis process itself.

Effect of carbonisation temperature on yield and composition of charcoal

Low carbonization temperatures give a higher yield of charcoal but this charcoal is low grade, is corrosive due to its content of acidic tars, and does not burn with a clean smoke-free flame. Good commercial charcoal should have a fixed carbon content of about 75% and this calls for a final carbonising temperature of around 500°C.

The yield of charcoal also shows some variation with the kind of wood or biomass. For wood there is evidence that the lignin content of the wood has a positive effect on charcoal yield. A high lignin content gives a high yield of charcoal. Therefore, mature wood in sound condition is preferred for charcoal production. Dense wood also tends to give a dense, strong charcoal, which is also desirable. However, very dense woods sometimes produce a friable charcoal because the wood tends to shatter during carbonization. The friability of charcoal increases as carbonization temperature increases and the fixed carbon content increases as the volatile matter content falls. A temperature of 450 to 500°C gives an optimum balance between friability and the desire for a high fixed carbon content.

Stop Burning Forest: Convert Biomass Waste Into Energy and Biochar

The tradition of open land for agriculture and plantations by burning the forest is a tradition of environmental and health damage, so it should be promptly discontinued. The smoke produced is also disrupting transportation. In addition to strict regulations that also use technology that can provide maximum benefit, need to be sought and applied. Or by economic review, how the problem is to bring profitable opportunities. Biomass waste generated from clearing land can be utilized for the production of biochar and energy.

CHP engine would be very beneficial to the environment, given the state of Indonesia which some still lack power (only about 60% area get electricity). A JFE pyrolysis unit with a capacity of 200 tons / day INPUT will produce about 60 tons / day of biochar and power 5 MW. Production of biochar with this pyrolysis technology is carbon negative, because biochar produced will absorb carbon dioxide in the atmosphere is greater than the biochar-making process. Biochar is applied again to the farm will provide benefits for soil fertility and sequestration of CO2 from the atmosphere.

JFE continuous pyrolysis technology will provide solutions to those problems. Waste biomass will be converted into biochar and energy for heat and electricity production. The smoke that interfere with vision and breathing are also not going to happen because of exhaust emissions from the pyrolysis plant is well below the emissions standards required. A number of tools to harvest biomass from land should be used to meet the needs of the pyrolysis plant raw materials.



Indonesia is committed to reducing its emissions by one through the mechanism of REDD +, with a target of 26% in 2020 or it could reach 41% if there is assistance to Indonesia. Agriculture and waste contribute greatly in contributing to emissions, iklimkarbon.com for the detail info. The flow of funds from developed to developing countries through REDD + reached 30 billion U.S. dollars worth of IDR 270 trillion per year. Indonesia launched the Indonesia green with the movement of one billion trees. One tree can absorb CO2 is known to 28 tons / year and hold water up to 100 liters / year. While the average human breathe in oxygen of 10 tons / year and uses 10 liters of water / day.

Let salvation of the earth by stopping the burning of forests and convert biomass waste into energy and biochar. To see the JF BioCarbon pot test please click here

GENERAL OVERVIEW OF CHARCOAL PROPERTIES

The quality of charcoal depends on both wood species used as a raw material and of the proper application of the carbonisation technology. Charcoal produced from hardwood like beech or oak is heavy and strong. Charcoal made from softwood, on the other hand, is soft and light. The density of beech charcoal is 0.45 t/m3a, that of pine charcoal 0.28 t/m3. The bulk density of charcoal does not only depend on the apparent density but also on the size distribution, and is in the range of 180-220 kg/m3. The gross calorific value (GCV) is usually in the range of 29-33 GJ/t.

Good quality charcoal was characterized by Chaturvedi as follows: “[It] retains the grain of the wood; it is jet black in colour with a shining luster in a fresh cross-section. It is sonorous with a metallic ring, and does not crush, nor does it soil the fingers. It floats in water, is a bad conductor of heat and electricity, and burns without flame.”

Charcoal intended for barbecue typically contains 20-30%mass of volatiles, whereas metallurgical charcoal often contains 10-15%m (or even less) volatile matter. Hence, taking ash contents into account, the fixed carbon content is 78-90 %mass.

This carbon is a finely crystalline and practically free of sulfur. Charcoal also contains volatiles that may escape at elevated temperatures (obviously above the charcoal manufacturing process of approximately 400 C), consisting of hydrogen, oxygen, and nitrogen. Ash content is approximately 1.5-5%mass. Charcoal also contains water, the amount being dependent on ambient temperature and humidity. Moisture content varies between 5 %m-8 %mass.

Standards for barbecue charcoal and charcoal briquettes, according to EN 1860.

Charcoal: Carbon (fix), dry basis > 75% Ash, dry basis < 8% Moisture, wet basis < 8% Granulation [d > 80 mm] < 10% [d > 20 mm] > 80% [0 mm < d < 10 mm] < 7% Bulk density > 130 kg/m3

Charcoal briquettes: Carbon (fix), dry basis > 60% Ash, dry basis < 18% Moisture, wet basis < 8% Granulation Suitable for BBQ equipment of EN 1860-1 [d < 20 mm] < 10% Binder Combustion gases cause no health hazards in contact with food. Binder is of food grade quality.

Source : INDUSTRIAL CHARCOAL PRODUCTION, A Development of a sustainable charcoal industry,Presented by FAO