Which is Better, Efficient Boiler or Pyrolysis System ?

Fiber and palm kernel shells (PKS) are palm oil mill solid wastes that are produced in CPO production in that mill. The amount of fiber and PKS waste is quite a lot, which is around 20% of each fresh fruit bunch (FFB) or almost the same as the CPO produced. A palm oil mill with a capacity of 60 tons / hour FFB can produce fiber as much as 8.1 tons per hour or 194.4 tons per day and PKS of 3.3 tons / hour per hour or 79.2 tons per day. And because both of them are waste, generally the utilization of the waste is not initially considered, including for use as fuel in boilers in palm oil mills for the production of electricity and steam. The use of fiber and PKS for boiler fuel generally uses 100% fiber and about 30% of the PKS. Under these conditions the remaining 70% of the PKS can be used for other things including being sold or even exported.

When the shell becomes a commercial commodity and demand is greater, palm oil mills replace their old inefficient boilers with new boilers that have a high level of efficiency. In this way, 100% of the PKS is no longer used to boiler fuel and only requires fiber as fuel. In this condition a paradigm shift in thinking begins to occur, that is when the solid waste is almost unnoticed and tends to be considered a problem, then it becomes an important part of earning additional income and it can even be estimated that if the shell is successfully sold then it is sufficient to cover the operational costs of the palm oil mill. Certainly something interesting if the production of CPO (crude palm oil) with 0% operational costs so that profit is increasingly attractive especially amid the recent decline in CPO prices.

Another thing that can be done is to use a pyrolysis unit, to run the boiler. With pyrolysis, not only fiber is used but also the empty fruit bunch (EFB). EFB are solid palm oil mill waste which to date have generally not been utilized. Besides producing energy, pyrolysis also produces products in the form of charcoal (biochar). Although charcoal (biochar) can also be used for energy sources, but in the business of palm oil companies the use of biochar for plantations can be more compatible. The use of biochar in palm oil plantations is mainly to  fertilizer saving, which is one of the major cost components (around 30%) in the CPO production business. With an area of ​​20 thousand hectares of oil palm plantations, fertilizer costs are estimated to reach Rp. 71.50 billion (around US$ 5 million) per year or Rp. 35.75 billion (around US$ 2.5 million) per year for every 10,000 hectares, for more details, please read here. Palm oil mills with big vision certainly try to maximize their potential with the aim of maximizing profits from upstream to downstream production activities. With Biochar can also target the increase in productivity of FFB, for more details, please read here.

The application of biochar will be easier to do in Indonesia than in Malaysia, this is because almost all palm oil mills in Indonesia also have palm oil plantations while in Malaysia the mills generally do not have their own palm oil plantations. The palm oil industry also has an important role for the two countries because Indonesia and Malaysia are the largest CPO producers and owners of biggest palm oil plantations in the world today. The palm oil industry contributes around 7% of Malaysian GDP and 3% of Indonesian GDP, so its role cannot be ignored. Both with pyrolysis and high efficient boilers, biomass waste can be used as an energy source and 100% of the PKS can be commercialized, but with pyrolysis is better because waste of EFB can also be processed, there are biochar product (while only ash if only with regular combustion) for Fertilizers saving in the palm oil plantations and the exhaust gases from the palm oil mill boilers are also clean because they burn gas (syngas) produced from the pyrolysis process.

EFB Biochar and Fertilizer Savings in Palm Oil Plantations

High palm oil plantation productivity and high oil yield has always been a goal in the palm oil business. The nutrient estimates needed to produce 25 tons of FFB / ha / year were 192 N, 11 P, 209 K, 36 Mg, and 71 Ca in kg / ha / year. With the production of 25 tons of FFB / ha / year palm oil or CPO crude will produce around 6.5 tons (25% of FFB). Analogy in the field of animal husbandry where the feed component holds 75% of production costs or is the highest cost component, as well as fertilizer, especially in palm oil plantations. Fertilizer is the most expensive cost or 60% of total maintenance costs. To achieve this productivity, the calculation practically of the need is more or less as follows: an afdeling with an area of ​​1,000 hectares with 1 hectare consisting of 143 trees, so there are 143,000 trees of palm oil. If the dose per tree is 2.5 kg, then the fertilizer needs are 357,500 kg (357.5 tons), with the price of non-subsidized chemical fertilizers for example Rp 10,000 / kg, the cost incurred is 3,575,000,000 (Rp. 3,575 billion or US$ 238,333). If an area of ​​10,000 hectares means fertilizer needs of Rp. 35.75 billion (US$ 2,383,33), whereas if the oil palm plantation is 20,000 hectares, it will reach Rp. 71.50 billion (US$ 4,766,667). Of course an amount that is not small.

The question is what efforts can be made to reduce fertilizer costs but increase palm productivity. One contradictory thing seems to be because it reduces the supply of fertilizer but expects high productivity. This is where we need to examine and explore the facts that occur in the field. With a tropical climate and high rainfall, it makes large leached fertilizers. A condition, for example in hilly and bumpy areas, when the rain falls, the fertilizer that is washed is very large, even in vain fertilization is done because it is not absorbed by the palm trees as the target. The high level of leaching from the use of fertilizers by rainwater makes only available a small amount of available fertilizer in real terms or a number of analyzes said averaging only 50%. With the available fertilizers there are only a few that are also automatically absorbed by the palm trees. When for example washing (leaching) can be reduced by only 30%, it means that the fertilizer that is still available becomes 70%, so that the fertilizer is absorbed more and more and the productivity of the palm oil fruit also increases.

The initial stage that can be done is the cost of the same fertilizer but the productivity of the palm oil fruit can increase up to for example 30%. Furthermore, if this can be achieved, fertilizer consumption will be reduced for example up to 30% but palm oil productivity can be maintained at that level. This is possible when biochar has become a microbial colony and the quality of the soil increases so that uptake of fertilizer is maximal. Biochar is one of the media that can be used for this. An empty fruit bunch that is widely available in palm oil mills and is generally not utilized as a raw material for biochar production. A palm oil mill with a production capacity of 60 tons / hour FFB will produce EFB 13.2 tons / hour so that if the palm oil mill operates 20 hours / day the EFB produced 264 tons / day. The production of biochar with pyrolysis can also produce liquid smoke which can also be used as fertilizer.

Why can biochar be used to increase palm oil productivity and even reduce fertilizer consumption? This is because biochar with its pores with a surface area of ​​about 200 m2 / gram can hold the fertilizer from washing, maintain moisture and many soil microbes that can live in these pores thus improving the physical and chemical properties of the soil. Biochar can last up to hundreds of years in the soil so it does not need to be added every year when the amount is sufficient. Biochar implementation can be started from small scale to massive scale. To process empty fruit bunches (EFB)  in the palm oil mill into biochar, a continuous pyrolysis equiment is needed, to be more clearly read here. To monitor the effectiveness of biochar on oil palm plantations today can use internet technology or IoT (Internet of Things) and for more details can be read here and here.