Production of EFB Pellet EFB or EFB Biochar ?

One of the main obstacles for palm oil mills to develop their business is the availability of electricity. With locations that are generally located in remote areas in the middle of palm oil plantations, palm oil mills do not get electricity supply from PLN (Indonesia State Owned Electricity Company). Eventhough electricity is very important in a production process, such as in the production of EFB pellets. Even though empty bunches or EFB in general are an environmental problem for palm oil mills. If every ton / hour of EFB pellet production takes 300 KW, then for production of 10 tonnes / hour (5,000 tonnes / month) 3 MW of electricity is needed, export of biomass fuels such as wood pellets and PKS (palm kernel shell)  with bulk shipments usually requires 10 thousand tons / shipment. So if the production of EFB pellets is planned for 10 thousand tons / month so that every month can export the EFB pellets, the factory capacity or EFB pellet production is 20 tons / hour (10,000 tons / month) 6 MW of electricity is needed. For palm oil mills, utilizing liquid waste or POME to become biogas is a potential source of energy for the production of electricity. However, with a palm oil mill capacity of 30 tonnes of FFB / hour, only about 1 MW of electricity is generated from POME biogas, so to produce 6 MW of palm oil mills with a capacity of 6 x 30 tonnes of FFB / hour are generated equal to 180 tonnes of FFB / hour. In fact, the average palm oil mill has a capacity of 45 - 60 tonnes of FFB / hour, so it is impossible to generate 6 MW of electricity from the palm oil mill's POME biogas.

The use of EFB pellets is the same as wood pellets and PKS is mainly for power generation. All three are biomass fuels. The high chlorine and potassium content in empty palm fruit bunches or EFB makes their use limited to power plants due to corrosion and scale causes. Not all power plants can use EFB pellets at large capacities or quantities. The use of coal-fired power plants with pulverized combustion technology can only be used with a small ratio or an estimate of less than 5%, but can be used more or even 100% in fluidized bed and stoker types of power plants. The capacity of fluidized bed and stoker type PLTU is generally much smaller than pulverized combustion.

When the biomass source is managed properly, the use of biomass fuel is an environmentally friendly and sustainable fuel. Biomass fuels like this are carbon neutral fuels, because they do not increase the concentration of CO2 in the atmosphere. This is because the biomass as a fuel source comes from plants whose growth is from the photosynthesis process, one of which uses CO2 from the atmosphere, so that when the biomass is burned, there is practically no addition of CO2 to the atmosphere. In general, there are 2 ways to overcome the CO2 concentration in the atmosphere which causes climate change and global warming, namely the carbon neutral scenario and the carbon negative scenario. In a carbon negative scenario, CO2 in the atmosphere will be captured and absorbed so that it is no longer released and the concentration of CO2 in the atmosphere can be reduced, as in the biochar application below. 

Whereas in the production of biochar with pyrolysis, besides not requiring a large amount of electrical power for its operation, electricity can also be generated from the use of excess energy from pyrolysis itself. By using the excess energy from pyrolysis, the palm oil mill boiler fuel does not need to use palm kernel shells and fiber. The use of gas or liquid fuels from the excess energy of the pyrolysis process also makes burning emissions cleaner. To achieve more complete combustion, gaseous or liquid fuels are better than solid fuels. Palm kernel shells so that everything can be sold or even exported. The biochar product applied to palm oil plantations will also improve the quality of the soil so that fertilizer use can be reduced and the productivity of palm oil fruit will increase. Biochar also absorbs CO2 from the atmosphere so that the use of biochar in large palm oil plantations means that with massive applications it can also be used for carbon trading. Recent developments indicate that the use of biochar is increasingly widespread, such as biomaterials for construction, transportation, plastics, packaging, furniture and so on. The use of biomaterials for these products means substituting the use of fossil-derived raw materials. 

So based on the above review, the production of biochar with pyrolysis is more profitable and easy to implement for palm oil mills compared to EFB pellet production. The addition of electricity production with a large capacity and the availability of sufficient raw materials is not easy and cheap for the average palm oil mill in Indonesia with a capacity of 45 - 60 tons of FFB / hour. Whereas in the production of biochar with pyrolysis, a certain amount of energy is produced which can be used for various purposes and the use of biochar is also multi-beneficial. Palm oil mills should consider this in particular in the aspects of waste management, plantation productivity, environmental aspects and business development, for more read here. Based on experience, the cost structure of the CPO or palm oil production business consists of about 80% of the cost of production is the cost of crops or plantation aspects, while the other 20% is the cost of processing or mill aspects. And the highest cost aspect of palm oil plantations is the cost of fertilization so that if the need for fertilizer can be reduced and the productivity of palm oil can be increased, of course it is very profitable, biochar is effective and efficient to use for this. 

EFB Biochar and Fertilizer Savings in Palm Oil Plantations

High palm oil plantation productivity and high oil yield has always been a goal in the palm oil business. The nutrient estimates needed to produce 25 tons of FFB / ha / year were 192 N, 11 P, 209 K, 36 Mg, and 71 Ca in kg / ha / year. With the production of 25 tons of FFB / ha / year palm oil or CPO crude will produce around 6.5 tons (25% of FFB). Analogy in the field of animal husbandry where the feed component holds 75% of production costs or is the highest cost component, as well as fertilizer, especially in palm oil plantations. Fertilizer is the most expensive cost or 60% of total maintenance costs. To achieve this productivity, the calculation practically of the need is more or less as follows: an afdeling with an area of ​​1,000 hectares with 1 hectare consisting of 143 trees, so there are 143,000 trees of palm oil. If the dose per tree is 2.5 kg, then the fertilizer needs are 357,500 kg (357.5 tons), with the price of non-subsidized chemical fertilizers for example Rp 10,000 / kg, the cost incurred is 3,575,000,000 (Rp. 3,575 billion or US$ 238,333). If an area of ​​10,000 hectares means fertilizer needs of Rp. 35.75 billion (US$ 2,383,33), whereas if the oil palm plantation is 20,000 hectares, it will reach Rp. 71.50 billion (US$ 4,766,667). Of course an amount that is not small.

The question is what efforts can be made to reduce fertilizer costs but increase palm productivity. One contradictory thing seems to be because it reduces the supply of fertilizer but expects high productivity. This is where we need to examine and explore the facts that occur in the field. With a tropical climate and high rainfall, it makes large leached fertilizers. A condition, for example in hilly and bumpy areas, when the rain falls, the fertilizer that is washed is very large, even in vain fertilization is done because it is not absorbed by the palm trees as the target. The high level of leaching from the use of fertilizers by rainwater makes only available a small amount of available fertilizer in real terms or a number of analyzes said averaging only 50%. With the available fertilizers there are only a few that are also automatically absorbed by the palm trees. When for example washing (leaching) can be reduced by only 30%, it means that the fertilizer that is still available becomes 70%, so that the fertilizer is absorbed more and more and the productivity of the palm oil fruit also increases.

The initial stage that can be done is the cost of the same fertilizer but the productivity of the palm oil fruit can increase up to for example 30%. Furthermore, if this can be achieved, fertilizer consumption will be reduced for example up to 30% but palm oil productivity can be maintained at that level. This is possible when biochar has become a microbial colony and the quality of the soil increases so that uptake of fertilizer is maximal. Biochar is one of the media that can be used for this. An empty fruit bunch that is widely available in palm oil mills and is generally not utilized as a raw material for biochar production. A palm oil mill with a production capacity of 60 tons / hour FFB will produce EFB 13.2 tons / hour so that if the palm oil mill operates 20 hours / day the EFB produced 264 tons / day. The production of biochar with pyrolysis can also produce liquid smoke which can also be used as fertilizer.

Why can biochar be used to increase palm oil productivity and even reduce fertilizer consumption? This is because biochar with its pores with a surface area of ​​about 200 m2 / gram can hold the fertilizer from washing, maintain moisture and many soil microbes that can live in these pores thus improving the physical and chemical properties of the soil. Biochar can last up to hundreds of years in the soil so it does not need to be added every year when the amount is sufficient. Biochar implementation can be started from small scale to massive scale. To process empty fruit bunches (EFB)  in the palm oil mill into biochar, a continuous pyrolysis equiment is needed, to be more clearly read here. To monitor the effectiveness of biochar on oil palm plantations today can use internet technology or IoT (Internet of Things) and for more details can be read here and here.